Ordinary Discount Square Drive Self Tapping Screws - Truss head Self-Drilling Screws – DaHe
Ordinary Discount Square Drive Self Tapping Screws - Truss head Self-Drilling Screws – DaHe Detail:
A fastener with an extra wide head, twinfast thread and self drilling point. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer. Material including:C1022 or equivalent steel and 410 stainless
C1022
Common usage is to attach wire or metal lathe to metal studs of a thickness between 12-20 gauge.the head design offers low clearance and an extra large bearing surface.the recommended drive speed for installation is 2500 rpm.
Heat Treatment:Screws shall be quenched in liquid and then tempered by reheating to 625゜F minimum.
Hydrogen embrittlement: Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement(The production from DaHe company Only)
410 stainless
Not as corrosion-resistant as the 18-8 variety but will drill through harder materials than the 18-8 screw. The same hardness gradient rule applies: material drilled should be a minimum of 10-20 rockwell hardness points less than the fastener
Heat Treatment:An ideal method of hardening 410 stainless screws is a bright hardening process,which typically involves a vacuum furnace, Another key factor affecting hardness is the chemistry of the fastener–most elements have maximum values but not minimums.This fact can contribute to hardness variance.
Usually supplied without a secondary finish
Hydrogen embrittlement: there is not Hydrogen embrittlement risk occur
Note: there is no single standard for Truss head self-drilling screws.these values are offered as a guide, deviations from these specifications may occur
Specification
Brand |
Solidex |
Product Type |
Truss head Self-Drilling Screws |
Material |
Stainless steel/carbon steel |
Drive Type |
Phillips/Six-lobe drive |
Product Length |
5/8″-12″/1/4″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 3/4″ 7/8″ 1″ 1-1/8″ 1-1/4″ |
Screw Diameter (mm) |
6#/7#/8#/10#/12# |
Thread Length |
Fully Thread |
RoHS |
Depend on request |
Finish |
Clear Zinc/Customized different color |
Corrosion resistance class |
C3 |
Product Standard |
GB/DIN/ANSI/BS/JIS |
Approvals |
CE |
Packing |
Coustomer’s Requirements |
OEM |
Accept customization |
Sample |
Free |
Place of Origin |
Hebei, China |
Suitable Use Type |
Suitable for indoor Use |
Manufacturer Guarantee |
1 Year Guarantee |
Supply Ability |
100 Ton/Tons per Day |
NOTE:
1: Drill Capacity: 8g (0.75-2.5mm of steel), 10g (0.75-3.5mm of steel)
2:Driver Type: Philips P2
3:Installation Speed: 2300-2500 RPM Max Drill Speed
Product detail pictures:
Related Product Guide:
Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for Ordinary Discount Square Drive Self Tapping Screws - Truss head Self-Drilling Screws – DaHe , The product will supply to all over the world, such as: Albania, Serbia, Spain, We believe with our consistently excellent service you can get the best performance and cost least goods from us for a long term . We commit to provide better services and create more value to all our customers. Hope we can create a better future together.
By Carey from Algeria - 2017.09.16 13:44
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Ann from Colombia - 2018.12.30 10:21