self drilling screw with wings
For assembling wood on metal, a hole in the wood is required with some space to avoid threading, the wood before the drill in the strip is finished, The Self-Drilling point drills steel whilst the wing tips create a pilot hole braking off when passing through the steel,Otherwise the drill tip could be burned, the wood,broken or the fixing wood-strip unglued.
Application
1:Both wings avoid the wood to be damaged by drilling a pilot hole.
With ribs under the head that countersunk the wood straight away, also melamine and other
materials.
2:Fine Thread Self-Drilling Countersunk Winged Screws are suitable for timber, fibre cement and chipboard to metal where a flush finish is required.
Feature
1: Self Drilling Screws with wings
2:Drills the wood.
3:Wood ream + metal drill.
4:Threads in the metal plate
5:After threading the ribbed underside of the screw head self-embeds for a flush or recessed finish, driving out any loose particles when countersinking.
Take these precautions
1:Drill previously a hole bigger than thread’s diameter.
2:Use an extra-large self drilling screw (non commercial).
3:Use a self drilling screw with two wings: the reamer created on the wood has a bigger diameter than thread so that this does not touch the wood. Wings and thread will break in contact with metal.
If you have a question, require a unique solution or are looking for a fastener that is not listed, please contact us with your requirements.
Specification
|
Brand |
Dahe--Solidex |
|
Product Type |
self drilling screw with wings |
|
Material |
carbon steel |
|
Drive Type |
Self Embedding, winged with a Phillips #2 or #3 Drive |
|
Product Length |
5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-7/16" 1-1/2" 1-5/8" 1-3/4" 1-13/16" 1-7/8" 2" |
|
Screw Diameter (mm) |
6#/7#/8#/10#/12# |
|
Thread Length |
Fully Thread/Partial Thread |
|
Head Type |
Countersunk/Countersunk ribbed |
|
Finish |
Color Zinc/Yellow Zinc/White Zinc/Ruspert/Customized |
|
Corrosion resistance class |
C4 |
|
Product Standard |
GB/DIN7ANSI/BS/JIS |
|
Approvals |
CE |
|
Packing |
On Requirements |
|
OEM |
Accept customization |
|
Sample |
Free |
|
Suitable Use Type |
Suitable for Outdoor/Indoor Use |
|
Supply Ability |
100 Tons per Day |
NOTE:
1: Drill Capacity: 8g (0.75-2.5mm of steel), 10g (0.75-3.5mm of steel)
2:Driver Type: Philips P2
3:Installation Speed: 2300-2500 RPM Max Drill Speed
